Origin	China
Model Number	110-500mm
Brand Name	KINZO
Blade Diameter	355mm
Frequency	3000
Structure	Circular Saw
specification	355x3.2x25.4x80T

Kinzo Woodworking Saw

 Specifications Model:

Number	Product Number	Specification
1	KW001	ï¼Âˆ4inchï¼Â‰110*2.2/1.8*25.4*30T
2	KW002	ï¼Âˆ4inchï¼Â‰110*2.2/1.8*25.4*40T
3	KW003	ï¼Âˆ6inchï¼Â‰160*2.2/1.8*25.4*40T
4	KW004	ï¼Âˆ6inchï¼Â‰160*2.2/1.8*25.4*60T
5	KW005	ï¼Âˆ7inchï¼Â‰180*2.2/1.8*25.4*40T
6	KW006	ï¼Âˆ7inchï¼Â‰180*2.2/1.8*25.4*50T
7	KW007	ï¼Âˆ7inchï¼Â‰180*2.2/1.8*25.4*60T
8	KW008	ï¼Âˆ8inchï¼Â‰205*2.8/1.8*25.4*40T
9	KW009	ï¼Âˆ8inchï¼Â‰205*2.8/2.2*25.4*50T
10	KW010	ï¼Âˆ8inchï¼Â‰205*2.8/2.2*25.4*60T
11	KW011	ï¼Âˆ9inchï¼Â‰230*2.8/2.2*25.4*40T
12	KW012	ï¼Âˆ9inchï¼Â‰230*2.8/2.2*25.4*60T
13	KW013	ï¼Âˆ10inchï¼Â‰255*3.0/2.4*25.4*30T
14	KW014	ï¼Âˆ10inchï¼Â‰255*3.0/2.4*25.4*40T
15	KW015	ï¼Âˆ10inchï¼Â‰255*3.0/2.4*25.4*50T
16	KW016	ï¼Âˆ10inchï¼Â‰255*3.0/2.4*25.4*60T
17	KW017	ï¼Âˆ12inchï¼Â‰305*3.2/2.5*25.4*40T
18	KW018	ï¼Âˆ12inchï¼Â‰305*3.2/2.5*25.4*50T
19	KW019	ï¼Âˆ12inchï¼Â‰305*3.2/2.5*25.4*60T
20	KW020	ï¼Âˆ12inchï¼Â‰305*3.2/2.5*25.4*72T
21	KW021	ï¼Âˆ14inchï¼Â‰355*3.2/2.5*25.4*40T
22	KW022	ï¼Âˆ14inchï¼Â‰355*3.2/2.5*25.4*50T
23	KW023	ï¼Âˆ14inchï¼Â‰355*3.2/2.5*25.4*60T
24	KW024	ï¼Âˆ16inchï¼Â‰405*3.4/2.8*25.4*40T
25	KW025	ï¼Âˆ16inchï¼Â‰405*3.4/2.8*25.4*50T
26	KW0026	ï¼Âˆ16inchï¼Â‰405*3.4/2.8*25.4*60T
27	KW027	ï¼Âˆ18inchï¼Â‰455*3.4/2.8*25.4*40T
28	KW028	ï¼Âˆ18inchï¼Â‰455*3.4/2.8*25.4*60T

Application materials:
soft wood,hard wood,mdf,chipboard,laminated,bilaminated,laminated,plywood

Saw Caution:
1. Please put alloy saw vertically hang the drying rack, be sure to avoid the damp places, do not place alloy saw on the ground or on a shelf,keeping flat will lead alloy blade deformation.
2. Use time, do not exceed the maximum speed. Speed method of calculation is attached for information.
3. Use time, must take protective mask, gloves, helmets,working protection shoes, protective glasses.
4.During the installation Alloy saw, must firstly confirm the function,use of saw table,first read the statement of saw table.Avoid mistakes Install so as to caused the accident.
5.During the installation Alloy saw,must first check whether there is a split distortions, and fill-ping, swaps and other phenomena teeth on alloy saw, and then install it.
6. Super-hard and sharp ofsawtooth alloy saw,prohibit the collision, falling ground, with taking carefully.
7.After install alloy saw blade, the saw core hole must be confirmed whether firmly fixed in the flange of saw table saw, a gasket must be good washer,and then gently hand to push saw blade,confirmed the rotation Whether the eccentric shaking.
8.The cutting direction of Alloy saw arrow must be aimed at rotation direction of saw table.Strictly no installation the opposite direction, the mistake direction will lead out tooth.
9. Pre-turn: the replacement of alloy saw,pre-turn for one minute before the use ,in order to let the saw table into the work status.
10.Before cutting, must confirm whether the use of alloy saw blade is in keeping with the cutting material.
11. Cutting material, it must Qingqingdijiang normal operation of the saw blade intercept material, prohibited Shijinjiangya pushing hard.
12. Prohibit the reverse turn,reverse leads to drop saw teeth, be dangerous.
13.During using, hear unusual voices and see the abnormal shaking, the section is not flat, immediately stop operations and look for unusual reasons.And replace saw .
14.At Cutting, the prohibition of the saw blade to stop suddenly in the middle of cutting. Stop in the middle of cutting,will lead the sawtooth shedding, saw deformation.
15. Pls promptly apply proof-rust oil after cutting.Prevent from saw rust.
16.When the sawtooth is not sharp,pls grind sawtooth again,must go to the manufacturers specify or professional grinding shop. Otherwise it will destroy the original sawtooth angle,impact accuracy cutting and shorten the life of saw blade use.

kinzosaw at gmail.com